WAN Frame Relay Point-to-Point

WAN Frame Relay Point-to-Point

R1#sh run int s1/0
Building configuration...

Current configuration : 145 bytes
!
interface Serial1/0
 ip address 10.1.1.1 255.255.255.0
 encapsulation frame-relay
 serial restart-delay 0
 frame-relay interface-dlci 102
end

R1#



R2#
R2#sh run int s1/0
Building configuration...

Current configuration : 145 bytes
!
interface Serial1/0
 ip address 10.1.1.2 255.255.255.0
 encapsulation frame-relay
 serial restart-delay 0
 frame-relay interface-dlci 201
end

R2#


R1#sh frame-relay pvc

PVC Statistics for interface Serial1/0 (Frame Relay DTE)

              Active     Inactive      Deleted       Static
  Local          1            0            0            0
  Switched       0            0            0            0
  Unused         0            0            0            0

DLCI = 122, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

  input pkts 36            output pkts 36           in bytes 3674
  out bytes 3674           dropped pkts 0           in pkts dropped 0
  out pkts dropped 0                out bytes dropped 0
  in FECN pkts 0           in BECN pkts 0           out FECN pkts 0
  out BECN pkts 0          in DE pkts 0             out DE pkts 0
  out bcast pkts 1         out bcast bytes 34
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
  pvc create time 00:34:40, last time pvc status changed 00:34:40
R1#

R1#ping 10.1.1.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/44/84 ms
R1#



R2#sh frame-relay pvc

PVC Statistics for interface Serial1/0 (Frame Relay DTE)

              Active     Inactive      Deleted       Static
  Local          1            0            0            0
  Switched       0            0            0            0
  Unused         0            0            0            0

DLCI = 221, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0

  input pkts 37            output pkts 36           in bytes 3708
  out bytes 3674           dropped pkts 0           in pkts dropped 0
  out pkts dropped 0                out bytes dropped 0
  in FECN pkts 0           in BECN pkts 0           out FECN pkts 0
  out BECN pkts 0          in DE pkts 0             out DE pkts 0
  out bcast pkts 1         out bcast bytes 34
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
  pvc create time 00:32:50, last time pvc status changed 00:31:33
R2#


R2#ping 10.1.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 28/47/80 ms
R2#